Users of the Rockspace extender use the default web re.rockspace.local and IP 192.168.0.254 address to access the settings of their device. But, nowadays, users are not able to access them due to some possible reasons. If you are also stuck in the same and looking for a effective tips to fix the issue, then you are in the right place.

In this write up, we will jotted some reasons behind this issue and also gives quick and effective troubleshooting tips to fix the issues. Read on!

Well, before we dive into the troubleshooting tips we would like to tell you about the reasons because to fix any kind of problem you should know the reasons first.

Why You Are Not Able to Access Web and IP Address?

For your information, there are a plethora of reasons why you can access the default addresses of the Rockspace extender. But here we listed some major reasons only so that you can understand them and will easily fix the issue.
  1. There is a possibility that your device becomes a temporary hiccup.
  2. Maybe the internet connection is weak.
  3. The usage of outdated and corrupted firmware.
  4. Devices become the victim of wireless interference.
  5. Rockspace extender runs on its outdated firmware.
  6. Typos in the web and IP address also could be the reason.
  7. The long-distance between the extender and router.
That’s all about the reasons that you should know. Now, you have to move to the next section in which we explained all the tips that you should know when the default web address not working.

Fix: Default Web Address Not Working

Reboot the Device

You can start with this hack because this is very easy to perform and quickly resolve the issues related to networking devices. You can eliminate the temporary hiccups from the extender by restarting the device. 

Below we mentioned all the instructions to reboot the device in a hassle-free manner.
  1. Turn off the extender and remove the device power cable.
  2. Give recovery time to extender.
  3. Now, plug the power cable again into the electricity source.
  4. Turn on the device by pressing the button.
This is how you can restart the extender in hassle free manner. Now, you need to do one thing that is try to access the any one extender address to ensure issue is resolve or not. If yes then great! If not, then move to the next possible solution.

Check Internet Connection

To access the default web address you device should connected to the reliable and constant internet. If your device accesses the weak network, then there is a high chance that you the default address are not working.

Therefore, we suggest you check the internet connection of your device if you find any problem then contact the internet service provider. Maybe the issue is from his side.

Update the Browser

Now, you should update the browser that you used to access default web address because there is a chance that you use an outdated browser version. So, first, check the browser version if you found it is outdated then updates it at the same time.

Remove the Wireless Interference

To remove the WiFi interference from the device you can change the placement of your Rockspace extender. Below we give some tips to remove it.
  1. Try to change the placement of the device at home.
  2. Keep the device away from home appliances and metal objects.
  3. Reduce the number of connected devices.
  4. Change the frequency channel of the extender.

Conclusion

Now, you know why you experience the re.rockspace.local not working issue and how you can fix it in a hassle-free manner. In case you are not able to access the default web address of the device, then you can use the reset method to fix the extender.