Due to its amazing product line, Netgear has managed to secure a place in the hearts of netizens. However, users who have done the NetgearEX6110 setup have reported facing a weird problem with their WiFi range extenders. They say that their extender keeps on rebooting.
In case you are also an owner of the same extender model and are tired of constant reboots of Netgear EX6110, we’ve got your back. Here, we’ve discussed some tips using which you can return your WiFi range extender to its normal working state. Don’t worry if you own some other range extender brought in by Netgear. The techniques shared here apply to all extender models. With that said, keep reading.
Prior Actual Troubleshooting
Before we go for the actual troubleshooting process, we want you to make aware of the major reason behind the constant reboots of a WiFi range extender. FYI, a networking device gets stuck in a reboot loop if it is overworking. Keeping this in mind, you can conclude that the Netgear EX6110 is demanding some rest. Therefore, do not wait to give your extender what it is asking for. Simply power it down after disconnecting it from every device in the home network. Now, all you have to do is wait. You can wait for a few seconds to a few minutes. Once you feel like that you’ve given enough time to your range extender, consider powering it up and restoring the previous connections.
But, what if your EX6110 extender is still stuck in a reboot loop?
In that scenario, you must go ahead with the troubleshooting techniques highlighted in the next section.
How to Fix Constant Reboots of Netgear EX6110?
Fix Power Issues
If not overworking, then power-related issues might be the culprit behind the problem you’re facing with your range extender. Well, power issues can arise if there is an insufficient power supply from the backend itself or the wall outlet chosen to power up the EX6110 extender is faulty. But, whatever the cause is, you should fix power issues. If the problem is from the backend, consider using a UPS to do the power supply job. Otherwise, you can repair the wall socket or power up the range extender using another one.
Install the Latest Firmware Version
Many users are unaware of the fact that every networking device including the EX6110 comes embedded with software. This software is generally called firmware in networking terms and is responsible for all hardware and software functionalities of the device.
Therefore, if you are tired of constant reboots of Netgear EX6110, then an outdated firmware of the device can be behind this foul play. Know that in the lack of the latest firmware version, a networking device starts lagging and gets stuck in the problem. Therefore, upgrade the firmware of your extender via the mywifiext.netsetup wizard.
Change the Extender’s Location
There is a possibility that your extender is placed at a location where it is getting affected by direct heat. Perhaps, you have exposed it to direct sunlight or have placed it near the hearth. Wherever you’ve placed it, amendments are required. Pick up your extender and place it in a cool area. However, it never means that you can deprive it of ventilation. The chosen room should be spacious and well-ventilated. Moreover, it must not house devices and objects like microwave ovens, televisions, refrigerators, fish tanks, metal doors, geysers, treadmills, Bluetooth speakers, baby monitors, etc. Avoid keeping the extender in a corner or near concrete walls.
Final Thoughts
That’s all about what to do if you’re tired of constant reboots of Netgear EX6110 extender. We assume that you’ve now learned what might have forced you to face the issue and what can be done to fix it. It is expected that you will be able to address the issue effectively.
However, we also want you to keep the extender-router distance optimal. If you do not pay attention to the same, then WiFi signal propagation may get affected and chances are that issues like the one you recently resolved rise again in the future.
